Your Subtitle text

Vista Glass

Vista, a scintillating 1x1 on 12x12 mesh glass mosaic series has a metallic appearance and is available in a broad range of colors.
Showroom Location

1631 Livernois
Troy, MI 48083


Phone-(248)
688-9543
Fax-(248)688-9561

Store Hours

Monday - Friday 9:00-6:00

Saturday - 9:00-4:00

Vista Glass Tile
 
Balbi
1” x 1” on
12" x 12" Mesh
 
Celotto
1” x 1” on
12" x 12" Mesh
 
Ghisetti
1” x 1” on
12" x 12" Mesh

Naccari
1” x 1” on
12" x 12" Mesh 
 
Ragazzi
1” x 1” on
12" x 12" Mesh
 
Seguso
1” x 1” on
12" x 12" Mesh
 
Tiozzo
1” x 1” on
12" x 12" Mesh
 
Venini
1” x 1” on
12" x 12" Mesh
 
Caldo
1” x 1” on
12" x 12" Mesh
 
Freddo
1” x 1” on
12" x 12" Mesh
   
APPLICATIONS
Appropriate for interior walls and backsplashes and exterior walls and backsplashes in non-freezing temperatures. Not recommended for countertop or floor use. Always follow proper installation methods. Installing glass tile involves some basic procedures that differ from installing ceramic or stone tile. Following these procedures will prevent simple mistakes that could result in the failure of the installation. *Make sure that glass tile is installed over the proper substrate. This is one of the most important factors in ensuring a good installation. When cutting glass, it is recommended to use a supreme diamond blade designed for chip free cutting of glass (wet only).

Approved substrate surfaces:
Fully cured concrete substrate
Properly installed cement backerboard

Do not install glass tile on: Particleboard, Chipboard, Masonite, Press wood, Plywood, Asbestos boards

To avoid adversely affecting the color of glass tile, white thin set is required for all installations. Glass tile must have a minimum of 1/8” grout joint and should not be butt set. To ensure adequate coverage and full contact to the tile it is recommended to lightly back butter the tile. Back buttering is required for semi-transparent glass tile. Use a glass cleaner and a soft lint free cloth for cleaning glass tile. To remove soap scum or water deposits, use a minimally abrasive cleanser and soft bristle brush.